
Complete shower cleaning and sealing — we deep-clean the surface and grout, then apply a sealer matched to your material to guard against moisture, staining and mould growth between cleanings. We serve homeowners and businesses across San Diego, Orange County and Los Angeles, restoring showers to a clean, protected, like-new finish.
When water darkens the tile or grout rather than beading, the sealer has worn off and the surface is absorbing moisture and staining agents.
Porcelain glaze may resist staining, but unsealed grout and natural stone absorb oils, dyes and minerals, leaving permanent dark patches.
Repeated mould in the same spots means moisture is sitting in unsealed grout or failed caulk — the perfect environment for spores to regrow.
Sealers degrade over 1–3 years depending on use and water hardness. An overdue sealer offers no protection, so staining accelerates.
Deep-clean, then seal against moisture, staining and mould growth.
We start with a thorough deep clean so we're not sealing dirt and scale into the surface — sealer bonded to contamination fails early.
The surface must be completely dry for the sealer to penetrate and bond. We allow proper dry time, especially on natural stone and grout.
We choose a penetrating sealer suited to your stone's porosity or your grout type, applied evenly across the surface and joints.
Excess sealer is buffed off so no residue dulls the finish, and we confirm water now beads on the protected surface.

In hard-water regions across San Diego, Orange County and Los Angeles, an unsealed or worn sealer lets moisture and minerals soak straight into grout and natural stone — which is why stains and mould return so quickly after a normal clean. Sealing after a deep clean creates a barrier that beads water, slows mineral penetration, and keeps the surface cleaner for far longer between professional visits.
After sealing, wait the full cure time before using the shower (usually 24 hours). Once cured, use pH-neutral cleaners only — acidic or abrasive products break down the sealer. A quick squeegee after each shower keeps the surface clean and lets the sealer last longer.
We apply this service to every type of shower material — from ceramic and porcelain to marble, travertine, slate and granite. Select your shower material below to see how we treat it.
We restore showers across all of Southern California. Pick your area to see this service near you.
A quality sealer typically lasts 1–3 years depending on the material, water hardness and cleaning products used. We reseal on a schedule that suits your shower.
Get a free quote from Southern California's shower cleaning, sealing and restoration specialists.