What is The Shower Cleaners?

Premium restoration service for showers, offering professional deep cleaning, sealing, and stone renewal services across Southern California.

Can you match my existing grout colour?

Yes — we match the existing grout colour as closely as possible, or recolour the whole shower for a uniform finish.

How long before I can use the shower after regrouting?

New grout needs 24–72 hours to cure before the shower is used, depending on the grout type.

Should I regrout or color-seal my grout?

If the grout is structurally sound but stained, color sealing refreshes it cheaply. If it's cracked or crumbling, regrouting is the correct fix.

Why is my grout cracking again after repair?

Recurring cracks usually mean movement, insufficient substrate, or water behind the wall. We assess the cause so the repair actually lasts.

Should I repair the grout or regrout the whole shower?

If only a few joints are cracked, spot repairs are cost-effective. If grout is broadly failing, stained or soft, a full regrout restores the whole shower's waterproofing and looks more uniform than patching.

Why does my grout keep cracking in the same spot?

Recurring cracks usually mean movement, a flexing substrate or water getting behind the wall. We find and address the cause so the repair holds, rather than just refilling the joint.

Cement or epoxy grout — which is better?

Epoxy grout is more water- and stain-resistant and ideal for wet areas, but it costs more and is harder to apply. Cement grout with a good sealer works well for most showers; we'll advise based on your needs.

Fresh, properly sealed grout for a uniform, watertight shower.

Shower Grouting / Grout Repairs

Call 714-868-8941

Shower grout repair and regrouting — we remove cracked, crumbled or mouldy grout and replace it with fresh, properly sealed grout for a uniform, watertight shower. We serve homeowners and businesses across San Diego, Orange County and Los Angeles, restoring showers to a clean, protected, like-new finish.

Signs you need this service

Cracked, crumbling or missing grout in the joints
Mould in the grout that returns after cleaning
Spongy or discoloured grout at the shower floor
Water appearing outside the shower or below the wall

Common problems we see

Cracked and crumbling joints

Movement, age and poor original installation crack the grout, which then crumbles and leaves gaps that channel water behind the tile.

Mould that returns after cleaning

Porous, stained grout holds mould roots below the surface, so it regrows within days of a standard clean until the grout is renewed.

Spongy or discoloured floor grout

Grout at the shower floor that stays dark or soft has absorbed water and may be failing — a warning sign for substrate damage below.

Water escaping the shower

Leaks appearing outside the shower or on the wall below often trace back to failed grout joints letting water through.

Our process in action

Fresh, properly sealed grout for a uniform, watertight shower.

Remove cracked, crumbled or mouldy grout from the joints.
Repack joints with fresh, properly mixed grout.
Clean up the tile face and seal the new grout.

1
Joint assessment
We identify which joints are failing and why — movement, water behind the wall, or simple age — so the repair actually lasts.
2
Remove failed grout
Cracked, crumbling and mouldy grout is removed cleanly from the joints down to sound substrate without damaging the tile edges.
3
Repack with fresh grout
Joints are repacked with properly mixed, colour-matched grout and tooled to a uniform finish.
4
Clean and seal
The tile face is cleaned of residue and the new grout is sealed once cured to resist future staining.

What you get

Watertight, uniform grout lines
Stops water intrusion behind walls
Refreshes the shower without retiling
Protects the substrate from water damage

Local context for Southern California showers

Grout is the watertight backbone of a shower, and across Southern California's hard-water region it's the first thing to fail — cracking, crumbling and staining as minerals and movement take their toll. Failed grout isn't just cosmetic: it's the most common path for water to reach the substrate and cause hidden damage, so prompt repair protects both the shower and the structure behind it.

What affects the price

Linear metres of grout being repaired
Whether it's spot repairs or a full regrout
Grout type — cement vs epoxy
Colour matching or full recolour
Condition of the substrate behind the tile

Aftercare & maintenance

Let new grout fully cure (24–72 hours) before using the shower. Once cured, seal the grout and re-seal annually. Use pH-neutral cleaners and a soft brush — avoid stiff brushes and acidic products that erode the joints.

Showers we restore

We apply this service to every type of shower material — from ceramic and porcelain to marble, travertine, slate and granite. Select your shower material below to see how we treat it.