What is The Shower Cleaners?

Premium restoration service for showers, offering professional deep cleaning, sealing, and stone renewal services across Southern California.

Why is my shower caulk turning black?

Black staining is mould growing in or under the caulk. We remove the failed sealant and replace it with a mildew-resistant product.

Can you caulk over existing caulk?

No — for a lasting, watertight seal we remove the old caulk first and apply fresh product to a clean, dry joint.

What type of caulk do you use in showers?

We use a premium 100% silicone, mildew-resistant sealant designed for wet areas. It stays flexible and resists mould far better than acrylic caulk.

How long until I can shower after caulking?

Most shower sealants need 24 hours to cure before water contact. We'll confirm the cure time for the product used.

Why use silicone instead of acrylic caulk in a shower?

100% silicone stays flexible, bonds to wet-area surfaces and resists mould far better than acrylic, which goes hard, cracks and turns mouldy within a year or two in a shower.

Can I shower the same day you recaulk?

No — most shower sealants need around 24 hours of cure time before water contact. We'll confirm the exact cure time for the product we use so you can plan around it.

Why do you remove the old caulk instead of going over it?

New caulk won't bond to old, failed sealant or the mould beneath it. Removing the old caulk to a clean, dry joint is the only way to get a lasting, watertight seal.

Why do showers in San Diego get scale so fast?

San Diego's hard, mineral-rich water deposits calcium and magnesium as it evaporates, so scale and soap scum build up far faster here than in softer-water regions — which is why professional cleaning and sealing on a schedule pays off.

Do you work in beach communities like La Jolla and Del Mar?

Yes — we serve coastal San Diego communities including La Jolla, Del Mar, Coronado, Encinitas and Pacific Beach, where humidity and salt air add to the wear on showers.

Can you restore a marble shower in San Diego without replacing it?

Almost always. We hone, polish and reseal etched and dulled marble showers across San Diego, returning them to a like-new finish at a fraction of the cost of retiling.

Premium mildew-resistant caulk for clean, watertight seams.

Shower Caulking in San Diego, CA

Call 714-868-8941

Shower Caulking in San Diego from The Shower Cleaners. Professional shower caulking — old, mouldy or failed sealant is removed and replaced with premium mildew-resistant caulk for a clean, watertight joint along every corner and seam. San Diego's hard water leaves calcium and soap-scum build-up on showers across the county. We provide shower cleaning, sealing and stone restoration throughout San Diego — from coastal La Jolla to inland communities.

Signs you need this service

Caulk that is peeling, shrinking or pulling away from the wall
Black mould staining that won't clean off
Soft or gummy caulk that stays tacky
Water leaking through a corner seam

Common problems we see

Peeling, shrinking caulk

As caulk ages it loses elasticity, shrinks and pulls away from the wall or floor, opening a gap that water runs straight through.

Black mould staining the seam

Mould grows in and under porous or failed caulk where moisture sits, and it can't be cleaned out — the sealant has to come out.

Soft, gummy or tacky caulk

Caulk that never fully cured, or is breaking down, stays soft and collects grime — a sign it needs to be removed and replaced.

Water leaking at a corner

Leaks at the base or corners usually mean the caulk has failed and water is escaping behind the tile or under the floor.

Our process in action

Premium mildew-resistant caulk for clean, watertight seams.

Cut out old, mouldy or failed sealant down to a clean joint.
Deep-clean and fully dry the joints.
Apply premium mildew-resistant caulk and tool a clean bead.

1
Cut out old sealant
We remove all old, mouldy or failed caulk down to a clean joint — applying new caulk over old traps residue and fails early.
2
Deep-clean and dry
The joint is scrubbed of mould and residue and fully dried so the new sealant bonds to a clean surface.
3
Mask and apply
We mask the tile for a crisp line and apply a premium 100% silicone, mildew-resistant sealant designed for wet areas.
4
Tool a clean bead
The bead is tooled smooth so it presses into the joint and sheds water, then the mask is removed for a clean finish.

What you get

Watertight seams at every corner
Mildew-resistant premium sealant
Clean, professional finish
Stops hidden water damage

Why San Diego showers need this

San Diego has some of the hardest municipal water in California, drawn from a mix of Colorado River and local sources that leaves heavy calcium and magnesium deposits on every surface it touches. In a shower, that translates to fast soap-scum and scale build-up on glass, tile, stone and grout — which is why San Diego showers dull and stain noticeably faster than in softer-water regions, and why regular professional cleaning and sealing is so worthwhile here.

Common shower issues in San Diego

Hard-water scale on glass and fixtures

San Diego's mineral-rich water leaves a chalky white crust on shower glass and chrome that shrugs off daily cleaners and needs controlled removal.

Coastal humidity and mould

Beach communities from La Jolla to Coronado stay humid, so showers dry slowly between uses and mould and pink bacteria take hold in grout and caulk.

Etched natural stone

Hard water and the wrong cleaners etch marble, travertine and limestone showers across the county, dulling the finish long before the stone itself is worn.

Failed grout and caulk

Minerals and movement crack and stain grout and shrink caulk, opening the most common path for water to reach the substrate behind San Diego showers.

What affects the price

Linear metres of seam being caulked
Number of corners, fixtures and penetrations
How much old caulk needs to be removed
Whether mould remediation behind the seam is needed
Access around glass, benches and niches

Aftercare & maintenance

Keep the new caulk dry for the full cure time (usually 24 hours). Clean it with mild, non-abrasive products and a soft cloth. A quick wipe-down after showering prevents soap and mould build-up and keeps the seam clean.